D1294 Brake Pads

Car focus brake pad installation precautions

The installation of the focus brake pads of the car is not only put into the brake calipers, but firstly the quality of the focus brake pads needs to be checked. Secondly, the relevant accessories need to be checked during installation and after installation, not because of the choice of focus brake pads and Improper installation causes the vehicle's braking performance to be affected.

Check the quality of the focus brake pads first. The crack on the surface is mainly caused by the brake pad being pressed and unable to slide in the caliper. It is necessary to maintain, clean, and lubricate the caliper piston path while replacing the brake pads. If oil is present, this may be caused by improper placement or improper operation of the brake pads. In this case, check the surface of the brake disc for oil. The oil on the surface of the disc needs to be cleaned together and the brake pads replaced.

Secondly, look at the other related parts of the brake system. If you find that the corners of the focus brake pads are white and slag, it is usually because of the poor return of the brake cylinder, the long-term dragging of the brake pads or the parking system failure. Caused. At this point we need to clean and lubricate the brake guide pin and the brake cylinder. If the brake guide pin or brake cylinder is damaged, it should be replaced. Clean the brake disc or replace the brake pad as appropriate.

Focus brake pad wear problem

As long as the wear of the left and right wheels is not very large, the brake pads of the car are all within the normal range. The four-wheel force of the vehicle on different roads, different corners and different speeds is inconsistent, and the braking force of the car will be inconsistent, so the wear of the brake pads will also have different degrees of deviation.

In general, the wear of automotive brake pads should be caused by insufficient braking on one side or unilateral drag. If the two brake pads of the same wheel are unevenly worn, check whether the brake pad material is consistent, whether the brake cylinder is returned properly, and whether the pump bracket is deformed. If the wear is uneven between the left and right wheels, it should be checked whether the braking time of the left and right brakes is the same, whether the suspension is deformed, whether the suspension bottom plate is deformed, and whether the suspension spring spring elasticity is lowered.

Car brake failure solution

Car brake failure is a very dangerous thing, especially when the vehicle is driving at high speed. Once this happens, you need to find a way to stop the inspection immediately. If there is a brake failure in the newly replaced brake pad, this may be caused by artificially getting grease on the surface of the brake pad during installation. After removal, it is possible to detect the presence or absence of oil. In this case, it is necessary to replace it immediately. Brake pads.

If the brake is not working after a period of driving in the car. If this happens in the road area water, it may just be the brakes when passing the puddle. The high temperature brake pads and the plate will quench with cold water, forming a hard oxide layer on the surface of the brake disc, and then braking normally. It will return to normal several times, but if it still can't be effectively braked, it may need to repair the brake disc, and it can only be replaced seriously.