D763 Brake Pads
Brand Feilong
Product origin China
Delivery time 30 days
Supply capacity 30000 sets/month
Comfort: The FeiLong brake pads are positioned in the mid-to-high-end models as well as the original supporting products. They have been awarded the TS16949/2009 physique certification with the design qualification in China through SGS strict audit. They meet the European ECE requirements and meet the OE requirements through various test certificates of OE. Claim.
BMW 320i Rear brake pads features
High comfort, low noise, responsive, long service life, no dust, short brake pads
BMW 320i Rear brake pads advantages
1. Fully meet the high comfort requirements of the brake
2. The original factory quality adopts the international original small metal and copper-free formula to meet the braking distance required by the original factory.
3. Advantageous and comfortable braking feel, brake friction plate hardness of 85 Rockwell hardness, in the congested city and rugged mountain areas, also ensure smooth and safe braking
4. Using less metal formula, the noise is very low, greatly reducing urban noise pollution
5. Polymer carbonization, less wear debris, no dust, brake disc clean and long service life
6. Compliance with TS16949/2009 certification
BMW 320i Rear brake pads related question
What is the smell of burnt after changing the brake pads for a few times?
Repeated brakes cause the brake pads to rub together to produce a high temperature, which is because the new piece and the brake disc can not be in close contact, need to run-in, to evenly slow brakes to run in, try to avoid sudden braking, normal driving, probably Running about 100 kilometers should be about the same. The smell of burnt smell that you smell may be caused by the frequent braking of the tires and the friction between the tires and the road. It is not a malfunction, please feel free to drive!
How to check the brake pads?
The brake pad consists of two parts: one is a metal base plate and the other is a friction plate. When braking, the friction plate contacts the brake disk to generate friction and acts as a brake. Obviously, the friction lining will become thinner and thinner. The friction plate portion of the new brake pad is generally 10 mm, and when the remaining 5 mm is left, it is time to consider replacing the brake pad. The remaining 2 mm is quite dangerous and the brake pads must be replaced immediately.
Brake pads can damage the brake disc?
For some brake pads, some brake pads will have a metal pin hidden inside the friction plate. After the friction plate is worn to a certain extent, the metal needle will contact the brake disk, and a strong noise will be generated when braking, reminding you to replace the brake. sheet. If the friction lining is completely exhausted, the metal base will be in direct contact with the brake disc, not only will not function as a brake, but will also wear the brake disc.
