D976 Brake Pads

　　The brake pads are the most important safety parts in the brake system of the car. The performance of the brake pads is directly related to life safety. There are many reasons for the noise generated by the car during the braking process, and the quality of the brake pad is the highest factor of its influence factor. Therefore, the Feilong brake pads with better noise reduction performance are the right choice for you.

　　The feilong brake pads, from the selection of materials to the production, each step is a good masterpiece.

　　First of all, from the material, we use high-end friction materials such as carbon fiber, imported aramid fiber and ceramic fiber. After the molding process is formed by equal heat pressing, it is then ablated, hot pressed, bench verified, and model. A series of processes, such as road test, steadily improve the quality of the product, so that the brake pad can maintain a stable friction coefficient at high and low temperatures.

　　In addition, the composition of the Feilong brake pad contains aramid pulp and chopped fiber, which is an important reason to improve the friction performance of the brake pad, reduce noise and improve driving comfort. The most important thing is that the Feilong brake pads are made of German advanced silencer technology, which is coated with a layer of absorbing coating, which greatly improves the comfort of the brakes and effectively suppresses the noise.

　　The cause of the brake pad failure

　　The ceramic brake pads of the car play an important role in ensuring the safety of the driver. When the brake system fails, if the brake system of the car can be correctly judged, many dangers can be avoided. With the development of the national economy, the car has entered the ordinary family, and should pay more attention to the judgment analysis of the failure of the brake system.

　　We discuss the types and causes of brake system failures in the following aspects:

　    1. The brake suddenly fails. When the brakes are continuously applied, the brake pedal is stepped to the extreme position, but there is no brake. The reason is:

• There is a serious oil leak in the brake master cylinder or sub-pump.

• The brake master cylinder or the cylinder piston seal is broken, or there is excessive air in the brake circuit.

  
  

　　2. The braking effect is not good. The car is normally braked, but the brake distance is outside the specified value. The reasons are: (a) air is infiltrated into the brake fluid; (b) leakage occurs in the brake system, and system pressure cannot be guaranteed;

　　3. the brakes appear deviation. The reason is that the brake gap is inconsistent and the brake is not synchronized.

　　4. The brakes are shaking. The reason is that the end face of the brake disc is out of tolerance, the brake caliper is deformed, and the brake pad is tapered.

　　5. the brakes do not return. In this case, it is generally first checked whether the brake hub is hot. If a single brake wheel is hot, the brake is faulty; if all four hubs are hot, the brake master cylinder is faulty.

　　6. The brakes are buzzing. The reason is that the brake disc and the brake pad or the brake drum and the shoe are not worn properly.