Barke Pads 29175
Brand FEIROEN
Product origin CHINA
Delivery time 35days
Supply capacity As your request
1. High quality assurance with EMARK certification.
2. OE quality braking compliant, bringing added safety and reliability.
3. Excellent stopping power
4. Extended pad and rotor life
5. Low noise
6. Consistent braking effort and pedal feel.
7. Wire mesh & adhesive layer provide secure attachment to backing plate.
8. Steel backing plate with corrosion resistant coating.
9. Installation hardware include in every kit.
10. Visual wear slot indicates when brake pads need to be replace.
Automobile brake system maintenance method
The brake system of a car is very important for every car. So what do we need to check and maintain the brake system and its accessories?
Generally, we should check the brake pads once for 5,000 kilometers. Never replace the brake pads until the friction material has been worn out. The brake pads that have reached the limit of use must be replaced. Even if they can be used for a period of time, the braking effect will be reduced and the driving safety will be affected.
Also be careful when replacing the brake pads, do not damage the sub-pump and calipers. It is necessary to use a special tool to push the brake cylinder back. Do not use too much force. Otherwise, the brake caliper guide screw may bend and the brake pad may be stuck. After the replacement is completed, check it again. Be sure to step on the brakes to eliminate the gap between the brake pads and the brake disc.
Common brakes in car brakes
1. Excessive wear in the car when trembling on the brakes, the flatness of the surface of the brake disc has been misaligned to a certain extent. If this happens, it is recommended that you go to a regular brand store or auto repair shop for maintenance and repair. Grind or replace directly. This phenomenon is more likely to occur in cars that are generally older.
2. Brake weakness is likely to result in a loss of pressure in the transmission line that provides pressure, resulting in failure to provide braking force in time. At this time, you should go to a regular brand store or auto repair shop for maintenance.
3. When the brake pedal is pressed, the pedal has no resistance and does not rebound. At this time, it is necessary to judge whether the brake fluid is missing, whether the brake cylinder and the pipe joint are leaking, whether the master pump and the pump parts are damaged.
4. When the brakes are continuously applied, the pedal position rises and there is no feeling of sinking. This is the leak.
5. The reason why the brakes become soft is that the brakes become soft and the braking force is abnormally weakened. There are usually three reasons for this type of failure: the first is that the oil pressure of the sub-pump or the main pump is not enough, and the oil leakage may occur; the second is the brake failure. For example, brake pads and brake discs; the third type is that the brake line leaks into the air. If the pedals are slightly increased when the brakes are continuously applied, the tires are slightly elastic and have a sense of elasticity, indicating that air is infiltrated into the brake lines.
6. When the steering wheel “bias brake” is parked and the brake is about to stop, the steering wheel will be deflected to one side. The main reason for the fault is that the left and right sub-pumps of the brake system are not uniform to the brake pads. However, during normal driving, due to the rapid rotation speed of the brake disc, the phenomenon of uneven pumping is not obvious during rapid friction, so it is difficult to detect.
7. The reason why the brakes become hard Many female drivers will encounter the problem that the brakes become hard. The reasons for the hardening of the brakes are mainly caused by the failure of the vacuum booster, the brakes are not assisted, and the brakes are frequently caused.
